| Nomor Bagian | NE133QUB-N01 |
| Merek | BOE |
| Ukuran | 13.3 |
| Aplikasi | 3D Printer |
| Resolusi | 38403×2160 |
| Komposisi | CELL , Oxide TFT-L |
| Kecerahan | |
| CR | - |
| Warna | Grayscale |
| Lampu latar | No |
| Antarmuka | eDP |
| pabrikan | BOE |
| nama model | NE133QUB-N01 (BOE093B) |
| ukuran layar | 13.3 inch |
| tipe layar | CELL , Oxide TFT-LCD |
| nomor piksel | 3840(3)×2160 (UHD) 332PPI |
| pengaturan | LCR Vertical Stripe |
| area aktif (mm) | 293.76 × 165.24 (H×V) |
| garis besar (mm) | 297.76 × 173.04 × 1.25 (H×V×D) |
| area bezel (mm) | - |
| perlakuan | Antiglare (Haze 25%), Hard coating (3H) |
| pencahayaan | 0 cd/m² |
| rasio kontras | - |
| sudut pandang | 85/85/85/85 (Typ.)(CR≥10) |
| tanggapan | 25 (Typ.)(Tr+Td) ms |
| pemandangan bagus di | Symmetry |
| mode kerja | ADS, Normally Black, Transmissive |
| ketebalan kaca | 0.50+0.50 mm |
| keterusan | - |
| kedalaman warna | Grayscale |
| lampu latar | No B/L |
| massa | 167g (Max.) |
| digunakan untuk | 3D Printer |
| tingkat penyegaran | 60Hz |
| layar sentuh | Without |
| daftar ic driver | Built-in COG 6 source chips |
| jenis sinyal | eDP (4 Lanes) , eDP1.3 , HBR2 (5.4G/lane) , 40 pins Connector |
| sumber tegangan | 3.3V (Typ.) |
| maks. peringkat | Storage Temp.: -20 ~ 60 °C Operating Temp.: 0 ~ 50 °C |
| B133HAN02.0 | AUO | 13.3 | 1920×1080 |
| B133XW01 V0 | AUO | 13.3 | 1366×768 |
| B133XW04 V0 | AUO | 13.3 | 1366×768 |
| G133I1-L01 | Innolux | 13.3 | 1280×800 |
| L5F30812P00 | Epson | 13.3 | 1024×768 |
| LP133WH1-TLB1 | LG Display | 13.3 | 1366×768 |
| LP133WH2-TLB2 | LG Display | 13.3 | 1366×768 |
| LP133X09-A2 | LG Display | 13.3 | 1024×768 |
| LQ13X32 | SHARP | 13.3 | 1024×768 |
| N133I7-L01 | Innolux | 13.3 | 1280×800 |